Cubot Note 20 Pro Stock Firmware ROM (Flash File)


Cubot Note 20 Pro Stock Firmware ROM (Flash File)

Note 20 is an entry-level mobile phone Cubot. The unit mimics the rear design of the more premium Huawei Mate 30-series but has low-end specs on the inside. The displays are a 6.5-inch HD+, with 720 x 1560 display resolution and a waterdrop notch overhead the screen.

On the camera department, you are getting four sensors at the back, which is a combination of a 12 MP + 5 MP + 2 MP + 0.3 MP sensors, along with a dual-LED flash. Upfront, Cubot made use of a single 8-megapixel selfie sensor, which is kept in the overhead notch cut-out.

As for the CPU department, the device comes with a quad-core 2.0Ghz Cortex-A53, Mediatek MT6761 Helio A22 CPU, the same CPU used in the Cubot R 15 Pro. It has a 64-bit architecture and has support for the 4G LTE network. Memory options include a 3GB RAM and 64GB internal storage.

The device has no fingerprint scanner, but you are getting faceID and support for dual SIMs, FaceID, and a large 4200mAh built-in battery. Interestingly, the device comes with the latest Google Android 10 out of the box.

Download Rom

If you own the Cubot Note 20 Pro device and you need to flash in the official Cubot Note 20 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings. Settings > About phone > Software updates > Check for Updates. If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Requirements To Install Cubot Note 20 Pro Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size – 1.7 GB
  • Android Version – 10
  • Country – Global
  • Filename – CUBOT_NOTE 20 PRO_A013C_V06_20200902
  • Download ROM

How To Flash Cubot Note 20 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM