Download Blackview BV5500 Plus Stock Firmware ROM (Flash File)

0

Download Blackview BV5500 Plus Stock Firmware ROM (Flash File)

While there are high-speed rugged smartphones, there are entry-level rugged phones as well, and the Blackview BV5500 Plus is one of them. The device mounts a 5.5-inch display with 720 x 1440 pixels resolution, resulting in a 293 PPI (pixels per inch).

Specification wise, the Blackview BV5500 Plus is powered by the MediaTek MT6739V Chipset. This is a Quad-core 1.5 GHz Cortex-A53 CPU. Along with the CPU, there’s a PowerVR GE8100 GPU, 3 GB of RAM, and 32 GB internal storage which can be further expanded to 64GB via SD card.

The Blackview BV5500 Plus is built from a tire like rubber. It is a water/dust resistance device, thanks to the presence of IP68, IP69K, and MIL-STD-810G certification.

There are two camera sensors at the back; an 8 + 0.3 MP dual rear sensors, along with a single LED flash. In the front, there’s a single 5-megapixel front-facing camera for selfie, FaceID, and other AI features.

Interestingly, the BV5500 Plus boot Android 10.0 out of the box, comes with supports for a dual Nano-SIM card with the 4G LTE network. Battery power comes from a 4400mAh battery.

If you own the Blackview BV5500 Plus device and you need to flash in the official Blackview BV5500 Plus Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Blackview BV5500 Plus lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Blackview BV5500 Plus.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Blackview BV5500 PlusStock Firmware Rom.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size – 1 GB
  • Android Version – 10
  • Country – Global
  • Filename – Blackview_BV5500_Plus_MT6739_S1_200629_10.zip
  • Download ROM
  • Download ROM

How To Flash Blackview BV5500 Plus Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM