Download Cubot P40 Stock Firmware ROM (Flash File)


Download Cubot P40 Stock Firmware ROM (Flash File)

Cubot P40 Run on Android 10 and it is Powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

The Cubot P40 is the successor of the P30 launched back in 2019. As an upgrade, the newcomer is got 4-camera modules at the back, back come with a quad-core CPU instead of the octa-core chip used in the predecessor. The phone comes in a 6.2-inch screen with 720 x 1520 pixels resolution and a dewdrop notch above the display, which also serves as the home for the selfie sensor.

Under the hood, you are getting a quad-core Mediatek Helio A22 CPU clocked at 2.0GHz, along with 4GB RAM, 64GB expandable internal storage, and the PowerVR GE8320 GPU.

The Cubot P40 comes with 4-camera lenses at the back. The primary snapper is a 12-megapixel sensor pegged with 5-Megapixel wide lens, a 2-megapixel macro, and a fourth 0.3-megapixel depth lens, along with a dual-LED flash, while a single advertised 20-megapixel sensor seat upfront.

Download Rom

Although the P40 does not have a fingerprint scanner, you are getting FaceID and support for dual SIMs with a 4G LTE network. The device is available in Blue, Green, and Black colors, and runs on the latest Google Android 10 out of the box.

If you own the Cubot P40 device and you need to flash in the official Cubot P40 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Cubot P40 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Cubot P40.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Cubot P40 Stock Firmware Rom.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Mediatek MT6761
  • File Size –
  • Android Version – 10
  • Country – Global
  • Filename – CUBOT_P40_A023C_V11_20200702
  • Download ROM
  • Download ROM

How To Flash Cubot P40 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM