Figi Fx Run on Android 8.1 Go edition and it is powered by Mediatek MT6739 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.
Operating System：Android 8.1 Go edition
Camera：Camera： 2.0MP+13.0MP AF Rear Camera With Flash
+8.0MP FF Front Camera
Memory：16GB ROM+2GB RAM，Expandable Micro SD Card Up To 32GB
If you own the Figi Fx device and you need to flash in the official Figi Fx Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Figi Fx lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Figi Fx.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Figi Fx Stock Firmware ROM.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- SoC: Mediatek MT6739
- File Size – 1.3 GB
- Android Version – 8.1 Go edition
- Country – Global
- Filename – FX-Android8.1-FiGi-181109_1124.rar
- Download ROM
How To Flash Figi Fx Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 1