Download Motorola ONE VISION XT1970-2 Stock Firmware ROM (Flash File)


Download Motorola ONE VISION XT1970-2 Stock Firmware ROM (Flash File)

Motorola ONE VISION Run on Android 10 and it is powered by Exynos 9609 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Motorola One Vision smartphone runs on the Android v9.0 (Pie) operating system. The phone is powered by Octa-core (2.2 GHz, Quad-core, Cortex A73 + 1.6 GHz, Quad-core, Cortex A53) processor. It runs on the Samsung Exynos 9 Octa 9609 Chipset. It has 4 GB RAM and 128 GB internal storage.

Motorola One Vision smartphone has an IPS LCD display. It measures 160.1 mm x 71.2 mm x 8.7 mm and weighs 180 grams. The screen has a resolution of 1080 x 2520 pixels and 435 PPI pixel density. It has an aspect ratio of 21:9 and a screen-to-body ratio of 81.52 %. On the camera front, the buyers get a 25 MP f/2.0 Primary Camera(0.9µm pixel size) and on the rear, there’s a 48 MP + 5 MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 3500 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, NFC, and more.

If you own the Motorola ONE VISIONdevice and you need to flash in the official Motorola ONE VISION Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

Download Rom

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Motorola ONE VISION lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Motorola ONE VISION.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Motorola ONE VISION Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Exynos 9609
  • File Size – 2.1 GB
  • Android Version – 10
  • Country – Global
  • Filename – QSAS30.62-28-7
  • Download ROM TKPCA
  • Download ROM RETCA
  • Download ROM AMX China
  • Download ROM ATTMX China

How To Flash Motorola ONE VISION Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method Below

Follow the link below for the instructions on how to flash stock ROM

  • Download & Extract Firmware & RSD Lite tool
  • Install RST Lite and USB Driver on Computer
  • After Extracting The Firmware You will see an XML file “XXX” then open the file with notepad. Remove all lines with the word “getvar” there were two lines that have the word “getvar”, then save. (Note: Skip if No getvar)
  • Open RSD Lite, press the “…” Next to the Filename. Find and select the XML file that has been edited in step No.3
  • Reboot Phone to fastboot Mod and Connect to PC (if dead try Switched Off Phone)
  • Click Download/Start, Wait until Flashing Complete. Then unplug Phone and Switch it on