Download Oppo R17 Pro CPH1877_11_F.39 Stock Firmware ROM (Flash File)

0

Download Oppo R17 Pro CPH1877_11_F.39 Stock Firmware ROM (Flash File)

Oppo R17 Pro Run on Android 8.1 and it is powered by QCOM SD 710 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

The Oppo R17 Pro sports a 6.4-inch display with a waterdrop notch and has an in-display fingerprint scanner. Powering the phone is a Qualcomm Snapdragon 710 SoC along with 8GB of RAM and 128GB of storage. It has two 1850mAh batteries totaling the capacity to 3700mAh. Oppo ships a 50W SuperVOOC Flash charger in the box. The R17 Pro has a dual-camera setup consisting of a 12-megapixel primary and a 20-megapixel secondary sensor. It also has 3D sensors that help it for 3D scanning. It has a 25-megapixel selfie camera.

If you own the Oppo R17 Pro device and you need to flash in the official Oppo R17 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Oppo R17 Pro lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Oppo R17 Pro.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Oppo R17 Pro Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 710
  • File Size – 3 GB
  • Android Version – 8.1
  • Country – Global
  • Filename – QCOM SD 710
  • Download ROM

How To Flash Oppo R17 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 7

Follow the link below for the instructions on how to flash stock ROM