Download Oppo Reno 4 Pro CPH2109PU Stock Firmware ROM (Flash File)

0

Download Oppo Reno 4 Pro CPH2109PU Stock Firmware ROM (Flash File)

The smartphone houses a 4000 mAH non-removable battery that supports fast charging through 65W SuperVOOC 2.0 charger.

Oppo Reno 4 Pro comes with a 6.5-inch Full-HD+ AMOLED display with a resolution of 1080×2400 pixels. It comes with a 3D borderless sense screen that gives a super-sleek design to the phone along with a bezel-minimizing effect on the sides. You can buy the Oppo Reno 4 Pro in Starry Night and Silky White color options. Its dimensions are 160.2 mm x 73.2 mm x 7.7 mm (H x W x D), and it weighs about 161 grams.

Reno 4 Pro runs on runs Android 10 with ColorOS 7.2 on top and is powered with an octa-core Qualcomm Snapdragon 765G processor. Moreover, it has 128GB of internal storage that can be expanded using a microSD card through a dedicated slot.

If you own the Oppo Reno 4 Pro device and you need to flash in the official Oppo Reno 4 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it.

Requirements To Install Oppo Reno 4 Pro Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size – 6.9 GB
  • Android Version – 10
  • Country – Global
  • Filename – CPH2109PU_11_A.11_200711
  • Download ROM 

How To Flash Oppo Reno 4 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 6

Follow the link below for the instructions on how to flash stock ROM