The Oukitel C18 Pro is the direct successor of the C17 Pro launched back in 2019. So instead of the Helio P23 used in the previous version, the C17 Pro is got the Helio P25 CPU and will have four camera sensors at the back. The display is a 6.55-inch HD+ display with 720 x 1600 pixels resolution, with a punch-hole notch overhead.
The four camera sensors on the backside are a combination of a 16 MP main sensor + an 8 MP ultra-wide lens + a 2 MP depth and the fourth 2 MP macro lens. There is also a dual-LED flash at the back of the phone, while a single 16-megapixel seat upfront.
The aforementioned CPU is an octa-core Mediatek Helio P25 SoC clocked at 2.39 GHz, along with Mali-T880 GPU, 4GB RAM, and 64GB internal storage, expandable up to 128GB via microSD card.
The device is running Android 10 and comes with dual-SIM cards with full support for 4G VoLTE network. There is also a rear placed fingerprint scanner, and a large 4000mAh battery juice out of the box. Other specifications and silent features of the Oukitel C18 Pro are detailed in the table below.
If you own the Oukitel C18 Pro device and you need to flash in the official Oukitel C18 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Oukitel C18 Pro lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Oukitel C18 Pro.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Oukitel C18 Pro Stock Firmware Rom.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- File Size – 1.3 GB
- Android Version – 9.0
- Country – Global
- Filename – OUKITEL_C18_Pro_EEA_V19_20200415
- Download ROM
How To Flash Oukitel C18 Pro Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 1