Download Samsung Galaxy Note 10 Plus Stock Firmware ROM (Flash File)

0

Download Samsung Galaxy Note 10 Plus Stock Firmware ROM (Flash File)

Samsung Galaxy Note 10 Plus (Galaxy Note 10 Pro) smartphone runs on the Android v9.0 (Pie) operating system. The phone is powered by Octa-core (2.73 GHz, Dual-core, M4 Mongoose + 2.4 GHz, Dual-core, Cortex A75 + 1.9 GHz, Quad-core, Cortex A55) processor. It runs on the Samsung Exynos 9 Octa 9825 Chipset. It has 12 GB RAM and 256 GB internal storage.

Samsung Galaxy Note 10 Plus (Galaxy Note 10 Pro) smartphone has a Dynamic AMOLED display. It measures 162.3 mm x 77.2 mm x 7.9 mm and weighs 196 grams. The screen has a resolution of 1440 x 3040 pixels and 495 PPI pixel density. It has an aspect ratio of 19:9 and a screen-to-body ratio of 91.66 %. On the camera front, the buyers get a 10 MP f/2.2, Wide Angle Primary Camera(26 mm focal length, 3″ sensor size, 1.22µm pixel size) and on the rear, there’s a 12MP + 12MP + 16MP camera with features like Auto Flash, Face detection, Touch to focus. It is backed by a 4300 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, NFC, and more.

If you own the Samsung Galaxy Note 10 Plus Android device and you need to flash in the official Samsung Galaxy Note 10 Plus Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Samsung Galaxy A20 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Samsung Galaxy A20.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Samsung Galaxy Note 10 Plus Stock Firmware Rom.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size –
  • Android Version –
  • Country – Global
  • Filename –
  • Download ROM

How To Flash Samsung Galaxy Note 10 Plus Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 10

Follow the link below for the instructions on how to flash stock ROM