Samsung Galaxy S10 5G smartphone was launched in February 2019. The phone comes with a 6.70-inch touchscreen display at a pixel density of 505 pixels per inch (PPI) and an aspect ratio of 19:9. Samsung Galaxy S10 5G is powered by a 1.9GHz octa-core Samsung Exynos 9820 processor. It comes with 8GB of RAM. The Samsung Galaxy S10 5G runs Android 9.0 and is powered by a 4500mAh non-removable battery. The Samsung Galaxy S10 5G supports wireless charging, as well as proprietary fast charging.
The Samsung Galaxy S10 5G on the rear packs a 12-megapixel primary camera with an f/1.5 aperture; a second 12-megapixel camera with an f/2.4 aperture; a third 16-megapixel camera with an f/2.2 aperture and a fourth 0.038-megapixel camera. The rear camera setup has phase detection autofocus. On the front, the Samsung Galaxy S10 5G packs a 10-megapixel primary camera with an f/1.9 aperture and a second 0.038-megapixel camera. The front camera also features autofocus.
The Samsung Galaxy S10 5G runs One UI based on Android 9.0 and packs 256GB of inbuilt storage. The Samsung Galaxy S10 5G is a single SIM (GSM) smartphone that accepts a Nano-SIM card. The Samsung Galaxy S10 5G measures 162.60 x 77.10 x 7.94mm (height x width x thickness) and weighs 198.00 grams. It features an IP68 rating for dust and water protection.
Connectivity options on the Samsung Galaxy S10 5G include Wi-Fi 802.11 a/b/g/n/ac/Yes, GPS, Bluetooth v5.00, NFC, USB Type-C, 3G, and 4G with active 4G on both SIM cards. Sensors on the phone include accelerometer, ambient light sensor, barometer, compass/ magnetometer, gyroscope, proximity sensor, and fingerprint sensor. The Samsung Galaxy S10 5G supports face unlock.
If you own the Samsung Galaxy S10 5G Android device and you need to flash in the official Samsung Galaxy S10 5G Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Samsung Galaxy S10 5G lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Samsung Galaxy S10 5G.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Samsung Galaxy S10 5G Stock Firmware Rom.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- File Size –
- Android Version –
- Country – Global
- Filename –
- Download ROM
How To Flash Samsung Galaxy S10 5G Stock Firmware Rom Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 10