Samsung Galaxy Z Flip smartphone was launched on 20th February 2020. The phone comes with a 6.70-inch touchscreen primary display with a resolution of 1080×2636 pixels at a pixel density of 425 pixels per inch (PPI). It also features a 1.10-inch as its second display, with a resolution of 112×300 pixels at a pixel density of 303 pixels per inch (PPI),. Samsung Galaxy Z Flip is powered by a 2.95GHz octa-core Qualcomm Snapdragon 855+ processor. It comes with 8GB of RAM. The Samsung Galaxy Z Flip runs Android 10 and is powered by a 3300mAh battery. The Samsung Galaxy Z Flip supports wireless charging.
The Samsung Galaxy Z Flip on the rear packs a 12-megapixel primary camera with an f/1.8 aperture and a pixel size of 1.4-micron and a second 12-megapixel camera with an f/2.2 aperture and a pixel size of 1.12-micron. The rear camera setup has autofocus. It sports a 10-megapixel camera on the front for selfies, with an f/2.4 aperture and a pixel size of 1.22-micron.
The Samsung Galaxy Z Flip runs One UI 2.0 based on Android 10 and packs 256GB of inbuilt storage. The Samsung Galaxy Z Flip measures 167.30 x 73.60 x 7.20mm (height x width x thickness) and weighs 183.00 grams. It was launched in Mirror Black, Mirror Purple, and Mirror Gold colors.
Connectivity options on the Samsung Galaxy Z Flip include Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.00, and USB Type-C. Sensors on the phone include accelerometer, ambient light sensor, barometer, compass/ magnetometer, gyroscope, proximity sensor, and fingerprint sensor. The Samsung Galaxy Z Flip supports face unlock.
If you own the Samsung Galaxy Z Flip Android device and you need to flash in the official Samsung Galaxy Z Flip Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Samsung Galaxy Z Flip lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Samsung Galaxy Z Flip.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Samsung Galaxy Z Flip Stock Firmware Rom.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- File Size –
- Android Version –
- Country – Global
- Filename –
- Download ROM
How To Flash Samsung Galaxy Z FlipStock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 10