Download Tecno KE6j Stock Firmware ROM (Flash File)

0

Download Tecno KE6j Stock Firmware ROM (Flash File)

Tecno KE6j Run on Android 10 and it is powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Tecno Spark 6 Air smartphone runs on the Android v10 (Q) operating system. The phone is powered by Quad-core, 2 GHz, Cortex A53 processor. It runs on the MediaTek Helio A22 Chipset. It has 2 GB, 2 GB RAM, and 32 GB internal storage.

Tecno Spark 6 Air smartphone has an IPS LCD display. It measures 174.6 mm x 79.3 mm x 9.3 mm. The screen has a resolution of 720 x 1640 Pixels and 256 PPI pixel density. It has an aspect ratio of 20.5:9 and a screen-to-body ratio of 84.17 %. On the camera front, the buyers get a 13 MP f/1.8 Primary Camera, 2 MP, Depth Camera and on the rear, there’s a 13 MP + 2 MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 6000 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, and more.

If you own the Tecno KE6j device and you need to flash in the official Tecno KE6j Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno KE6j lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Tecno KE6j.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Tecno KE6j Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Mediatek MT6761
  • File Size – 1.9 GB
  • Android Version – 10
  • Country – Global
  • Filename – KE6j-H6215GH-Q-GL-200617V123
  • Download ROM 

How To Flash Tecno KE6j Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM