Download Tecno Spark 6 Air KE6J Stock Firmware ROM (Flash File)

0

Download Tecno Spark 6 Air KE6J Stock Firmware ROM (Flash File)

Tecno Spark 6 Air Run on Android 8.1 and it is powered by Mediatek MT6761 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Tecno Spark 6 Air smartphone was launched on 30th July 2020. The phone comes with a 7.00-inch touchscreen display with a resolution of 720×1640 pixels and an aspect ratio of 20.5:9. Tecno Spark 6 Air is powered by a quad-core MediaTek Helio A22 (MT6761) processor. It comes with 2GB of RAM. The Tecno Spark 6 Air runs Android 10 and is powered by a 6000mAh battery.

As far as the cameras are concerned, the Tecno Spark 6 Air on the rear packs a 13-megapixel primary camera with an f/1.8 aperture and a second 2-megapixel camera. The rear camera setup has autofocus. It sports an 8-megapixel camera on the front for selfies, with an f/2.0 aperture.

The Tecno Spark 6 Air runs HIOS 6.2 based on Android 10 and packs 32GB of inbuilt storage that can be expanded via microSD card (up to 1000GB) with a dedicated slot. The Tecno Spark 6 Air is a dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM cards. The Tecno Spark 6 Air measures 174.68 x 79.36 x 9.30mm (height x width x thickness). It was launched in Comet Black and Ocean Blue colors.

Connectivity options on the Tecno Spark 6 Air include Wi-Fi, Bluetooth v5.00, 3G, and 4G with active 4G on both SIM cards. Sensors on the phone include an accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor.

If you own the Tecno Spark 6 Air device and you need to flash in the official Tecno Spark 6 Air Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Tecno Spark 6 Air lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Tecno Spark 6 Air.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Tecno Spark 6 Air Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Mediatek MT6761
  • File Size – 2 GB
  • Android Version – 10
  • Country – Global
  • Filename – Tecno_Spark_6_Air_KE6J_MT6761_V123_200617_10.zip
  • Download ROM
  • Download ROM 

How To Flash Tecno Spark 6 Air Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM