Download Vivo Nex 3 PD1924F Stock Firmware ROM (Flash File)


Download Vivo Nex 3 PD1924F Stock Firmware ROM (Flash File)

Vivo Nex 3 Run on Android 9.0 and it is Powered by QCOM Snapdragon 855 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Vivo Nex 3 smartphone was launched on 17th September 2019. The phone comes with a 6.89-inch touchscreen display with a resolution of 1080×2256 pixels. Vivo Nex 3 is powered by a 2.96GHz Qualcomm Snapdragon 855+ processor. It comes with 8GB of RAM. The Vivo Nex 3 runs Android Pie and is powered by a 4500mAh battery. The Vivo Nex 3 supports proprietary fast charging.

The Vivo Nex 3 on the rear packs a 64-megapixel primary camera with an f/1.7 aperture; a second 13-megapixel camera with an f/2.2 aperture and a third 13-megapixel camera with an f/2.4 aperture. The rear camera setup has autofocus. It sports a 16-megapixel camera on the front for selfies, with an f/2.0 aperture.

The Vivo Nex 3 runs FunTounchOS 9.1 based on Android Pie and packs 128GB of inbuilt storage. The Vivo Nex 3 is a dual-SIM smartphone. The Vivo Nex 3 measures 167.44 x 76.14 x 9.40mm (height x width x thickness) and weighs 217.00 grams. It was launched in Black and Blue colors.

Download Rom

Connectivity options on the Vivo Nex 3 include Wi-Fi 802.11 a/b/g/n/ac, GPS, Bluetooth v5.00, NFC, and USB Type-C. Sensors on the phone include a fingerprint sensor.

If you own the Vivo Nex 3 device and you need to flash in the official Vivo Nex 3 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo Nex 3 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo Nex 3.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo Nex 3 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 855
  • File Size – 7 GB
  • Android Version – 9.0
  • Country – Global
  • Filename – PD1924F_EX_A_1.10.7_vivo_qcom
  • Download ROM

How To Flash Vivo Nex 3 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 3

Follow the link below for the instructions on how to flash stock ROM