Download Vivo S1 PD1913F Stock Firmware ROM (Flash File)

0

Download Vivo S1 PD1913F Stock Firmware ROM (Flash File)

Vivo S1 Run on Android 9.0 and it is powered by Mediatek MT6768 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Vivo S1 is the company’s first phone launched under the new ‘S’ series of phones in India. The smartphone comes with a 32MP front camera and is backed by a 4500mAh battery.

Vivo S1 comes equipped with 6.38-inch full HD+ screen with 2340×1080 pixel resolution and 19:9 aspect ratio. The smartphone has three variants- 4GB RAM + 128GB ROM, 6GB RAM + 64GB ROM and 6GB RAM + 128GB ROM.

Vivo S1 comes powered by Qualcomm Snapdragon MediaTek Helio P65 octa-core processor. The smartphone runs on FunTouch OS9 based on the Android 9.0 Pie operating system.

For imaging duties, users will get a triple rear camera setup at the back. This comprises of a 16-megapixel primary sensor with f/1.78 aperture. Other sensors include an 8-megapixel secondary lens with f2.2 aperture and a 2- megapixel wide-angle sensor.

At the front, the handset boasts of a 32MP camera for selfies. The device is backed by a 4,500mAh battery. Buyers can choose from two color options- Diamond Black and Skyline Blue.

If you own the Vivo S1 device and you need to flash in the official Vivo S1 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo S1 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo S1.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo S1 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Mediatek MT6768
  • File Size – 1 GB
  • Android Version – 9.0
  • Country – Global
  • Filename – PD1913F_EX_A_1.6.8
  • Download ROM

How To Flash Vivo S1 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM