Download Vivo U10 PD1928F Stock Firmware ROM (Flash File)

0

Download Vivo U10 PD1928F Stock Firmware ROM (Flash File)

Vivo U10 Run on Android 9.0 and it is powered by QCOM SD 665 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

The Vivo U10 is an entry-level model aimed at the online-only market and will compete with offerings from Xiaomi and Realme. Vivo is offering a large 5000mAh battery, three rear cameras, and the relatively powerful Qualcomm Snapdragon 665 processor. Design isn’t a strong point, and the U10 looks a lot like several other Vivo models. The 6.35-inch HD+ screen has a waterdrop notch for the front camera. This phone is relatively bulky and not everyone will find it easy to hold and use.

You can get this phone with 3GB or 4GB of RAM, and 32GB or 64GB of storage. All the basics are covered, including a fingerprint sensor on the rear, and you even get 18W fast charging which is good for the budget segment. Performance is pretty good overall, and very competitive for the price. The cameras aren’t very versatile and photo quality is just average. Battery life was excellent in our tests.

If you own the Vivo U10 device and you need to flash in the official Vivo U10 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo U10 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo U10.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo U10 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 665
  • File Size – 5 GB
  • Android Version – 9.0
  • Country – Global
  • Filename – PD1928F_EX_A_1.9.5_VIVO_QCOM_LA.UM.7.11.R1-01300
  • Download ROM

How To Flash Vivo U10 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 3

Follow the link below for the instructions on how to flash stock ROM