Download Vivo U20 PD1941F Stock Firmware ROM (Flash File)

0

Download Vivo U20 PD1941F Stock Firmware ROM (Flash File)

Vivo U20 Run on Android 9.0 and it is powered by QCOM SD 675 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

The Vivo U20 is from the online exclusive U series from Vivo. The Vivo U20 sports a 6.53-inch IPS LCD display with a dewdrop notch at the top. It has a full-HD+ resolution and a screen-to-body ratio of 90.3 percent. The phone is a tad bulky at 193g which is mainly down to the 5,000mAh battery that it packs.

Powering the Vivo U20 is a Qualcomm Snapdragon 675 SoC and it is offered with 4GB RAM and 6GB RAM variants. Storage for both these variants remains the same at 64GB which is further expandable up to 256GB via a microSD card slot. The smartphone is available in Racing Black and Blaze Blue color variants. In the box, the smartphone comes with an 18W fast charger which helps top the device quickly.

Vivo ships the U20 with Funtouch OS 9.2 running on top of Android 9. It does get a fair amount of bloatware preinstalled on the smartphone. The Vivo U20 has a triple camera setup at the back consisting of a 16-megapixel primary camera, an 8-megapixel super-wide-angle camera, and a 2-megapixel macro camera. For selfies, it has a 16-megapixel selfie shooter. It clicks decent photos in daylight but the low-light camera isn’t great.

If you own the Vivo U20 device and you need to flash in the official Vivo U20 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo U20 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo U20.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo U20 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 675
  • File Size – 5 GB
  • Android Version – 9.0
  • Country – Global
  • Filename – Vivo_U20_PD1941F_EX_A_1.4.12_LA.UM.7.9.r1
  • Download ROM

How To Flash Vivo U20 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 3

Follow the link below for the instructions on how to flash stock ROM