Download Vivo Y50 PD1965F Stock Firmware ROM (Flash File)

0

Download Vivo Y50 PD1965F Stock Firmware ROM (Flash File)

Vivo Y50 Run on Android 10 and it is Powered by QCOM SD 665 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Vivo Y50 smartphone was launched in April 2020. The phone comes with a 6.53-inch touchscreen display with a resolution of 1080×2340 pixels and an aspect ratio of 19.5:9. It comes with 8GB of RAM. The Vivo Y50 runs Android and is powered by a 5000mAh non-removable battery.

The Vivo Y50 on the rear packs a 13-megapixel primary camera; a second 8-megapixel camera; a third 2-megapixel camera and a fourth 2-megapixel camera. The rear camera setup has autofocus. It sports a 16-megapixel camera on the front for selfies.

The Vivo Y50 runs FuntouchOS 10 based on Android and packs 128GB of inbuilt storage that can be expanded via microSD card (up to 256GB) with a dedicated slot. The Vivo Y50 is a dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM cards. The Vivo Y50 measures 162.04 x 76.46 x 9.11mm (height x width x thickness) and weighs 197.00 grams. It was launched in Iris Blue and Pearl White colors.

Connectivity options on the Vivo Y50 include Wi-Fi, GPS, USB Type-C, FM radio, 3G, and 4G with active 4G on both SIM cards. Sensors on the phone include accelerometer, ambient light sensor, proximity sensor, and fingerprint sensor. The Vivo Y50 supports face unlock.

If you own the Vivo Y50 device and you need to flash in the official Vivo Y50 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo Y50 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo Y50.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo Y50 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 665
  • File Size – 6 GB
  • Android Version – 10
  • Country – Global
  • Filename – PD1965F_EX_A_1.9.5
  • Download ROM

How To Flash Vivo Y50 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 3

Follow the link below for the instructions on how to flash stock ROM