Vivo Y81 Run on Android 8.1 and it is Powered by Mediatek MT6765 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.
Vivo Y81 smartphone was launched in June 2018. The phone comes with a 6.22-inch touchscreen display with a resolution of 720×1520 pixels at a pixel density of 270 pixels per inch (ppi) and an aspect ratio of 19:9. Vivo Y81 is powered by a 2GHz octa-core MediaTek Helio P22 (MT6762) processor. It comes with 3GB of RAM. The Vivo Y81 runs Android 8.1 and is powered by a 3260mAh battery.
The Vivo Y81 on the rear packs a 13-megapixel camera with an f/2.2 aperture. The rear camera setup has phase detection autofocus. It sports a 5-megapixel camera on the front for selfies, with an f/2.2 aperture.
The Vivo Y81 runs FunTouch OS 4.0 based on Android 8.1 and packs 32GB of inbuilt storage that can be expanded via microSD card (up to 256GB). The Vivo Y81 is a dual-SIM (GSM and GSM) smartphone that accepts Nano-SIM and Nano-SIM cards. The Vivo Y81 measures 155.06 x 75.00 x 7.77mm (height x width x thickness) and weighs 146.50 grams. It was launched in Black and Gold colours. It bears a plastic body.
Connectivity options on the Vivo Y81 include Wi-Fi 802.11 b/g/n, GPS, Bluetooth v5.00, Micro-USB, Wi-Fi Direct, 3G, and 4G. Sensors on the phone include accelerometer, proximity sensor, and compass/ magnetometer.
If you own the Vivo Y81 device and you need to flash in the official Vivo Y81 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo Y81 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo Y81.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Vivo Y81 Stock Firmware ROM.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- SoC: Mediatek MT6765
- File Size – 2.7 GB
- Android Version – 8.1
- Country – Global
- Filename – PD1732F_EX_A_1.3.15_vivo_mtk_alps-release-o1.mp6-pre4_mt6762.tar.gz
- Download ROM – Password – romprovider.com
- Download ROM – PD1732F_EX_A_2.3.4_22072019
How To Flash Vivo Y81 Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 1