Download Vivo Y83 PD1803BF Stock Firmware ROM (Flash File)


Download Vivo Y83 PD1803BF Stock Firmware ROM (Flash File)

Vivo Y83 Run on Android 8.0 and it is powered by MediaTek Helio P22 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Vivo Y83 smartphone was launched in May 2018. The phone comes with a 6.22-inch touchscreen display with a resolution of 720×1520 pixels at a pixel density of 270 pixels per inch (ppi) and an aspect ratio of 19:9. Vivo Y83 is powered by a 2GHz octa-core MediaTek Helio P22 (MT6762) processor. It comes with 4GB of RAM. The Vivo Y83 runs Android 8.0 and is powered by a 3260mAh battery.

The Vivo Y83 on the rear packs a 13-megapixel camera with an f/2.2 aperture. The rear camera setup has phase detection autofocus. It sports an 8-megapixel camera on the front for selfies, with an f/2.2 aperture.

The Vivo Y83 runs FunTouch OS 4.0 based on Android 8.0 and packs 32GB of inbuilt storage that can be expanded via microSD card (up to 256GB). The Vivo Y83 is a dual-SIM (GSM + CDMA and GSM + CDMA) smartphone that accepts Nano-SIM and Nano-SIM cards. The Vivo Y83 measures 155.21 x 75.24 x 7.70mm (height x width x thickness) and weighs 150.00 grams. It was launched in Aurora white and Polar Black and CharmRed colors.

Download Rom

Connectivity options on the Vivo Y83 include Wi-Fi, GPS, USB OTG, Micro-USB, FM radio, 3G, and 4G. Sensors on the phone include an ambient light sensor, gyroscope, proximity sensor, and fingerprint sensor. The Vivo Y83 supports face unlock.

If you own the Vivo Y83 device and you need to flash in the official Vivo Y83 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Vivo Y83 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Vivo Y83.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Vivo Y83 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: MediaTek Helio P22
  • File Size –
  • Android Version – 8.0
  • Country – Global
  • Filename – PD1803BF_MT6762_EX_A_1.11.14
  • Download ROM
  • Download ROM
  • Download ROM – Custom DA Rile Require for Flash tool

How To Flash Vivo Y83 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 1

Follow the link below for the instructions on how to flash stock ROM