Download Xiaomi Mi 10 Pro Stock Firmware ROM (Flash File)

0

Download Xiaomi Mi 10 Pro Stock Firmware ROM (Flash File)

Xiaomi Mi 10 Pro Run on Android 10 and it is powered by QCOM SD 865 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Xiaomi Mi 10 Pro smartphone runs on the Android v10 (Q) operating system. The phone is powered by Octa-core (2.84 GHz, Single core, Kryo 585 + 2.42 GHz, Tri core, Kryo 585 + 1.8 GHz, Quad-core, Kryo 585) processor. It runs on the Qualcomm Snapdragon 865 Chipset. It has 8 GB RAM and 256 GB internal storage.

Xiaomi Mi 10 Pro smartphone has an AMOLED display. It measures 162.6 mm x 74.8 mm x 8.9 mm and weighs 208 grams. The screen has a resolution of 1080 x 2340 pixels and 386 PPI pixel density. It has an aspect ratio of 19.5:9 and a screen-to-body ratio of 89.6 %. On the camera front, the buyers get a 20 MP f/2.0 Primary Camera and on the rear, there’s a 108+8+12+20 MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 4500 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS, Volte, NFC, and more.

If you own the Xiaomi Mi 10 Pro device and you need to flash in the official Xiaomi Mi 10 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Xiaomi Mi 10 Pro lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Xiaomi Mi 10 Pro.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Xiaomi Mi 10 Pro Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: Mediatek MT6737
  • File Size – 4 GB
  • Android Version – 10
  • Country – Global
  • Filename – CMI_images_V11.0.11.0.QJAEUXM
  • Download ROM – EEA
  • Download ROM – China
  • Download ROM – Global

How To Flash Xiaomi Mi 10 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 8

Follow the link below for the instructions on how to flash stock ROM