Xiaomi Mi 10 Ultra smartphone was launched on 11th August 2020. The phone comes with a 6.67-inch touchscreen display with a resolution of 1080×2340 pixels and an aspect ratio of 19.5:9. Xiaomi Mi 10 Ultra is powered by an octa-core Qualcomm Snapdragon 865 processor. It comes with 8GB of RAM. The Xiaomi Mi 10 Ultra runs Android 10 and is powered by a 4500mAh battery. The Xiaomi Mi 10 Ultra supports wireless charging, as well as proprietary fast charging.
The Xiaomi Mi 10 Ultra on the rear packs a 48-megapixel primary camera with an f/1.85 aperture and a pixel size of 1.2-micron; a second 20-megapixel camera with an f/2.2 aperture and a third 12-megapixel camera with an f/2.0 aperture and a pixel size of 1.4-micron. The rear camera setup has laser autofocus. It sports a 20-megapixel camera on the front for selfies, with an f/2.3 aperture and a pixel size of 0.8-micron.
The Xiaomi Mi 10 Ultra runs MIUI based on Android 10 and packs 128GB of inbuilt storage. The Xiaomi Mi 10 Ultra measures 162.38 x 75.04 x 9.45mm (height x width x thickness) and weighs 221.80 grams. It was launched in Obsidian Black, Mercury Silver, and Transparent Edition colors.
Connectivity options on the Xiaomi Mi 10 Ultra include Wi-Fi 802.11 a/b/g/n/ac/Yes, GPS, Bluetooth v5.10, NFC, Infrared, and USB Type-C. Sensors on the phone include accelerometer, ambient light sensor, compass/ magnetometer, gyroscope, proximity sensor, and in-display fingerprint sensor. The Xiaomi Mi 10 Ultra supports face unlock.
If you own the Xiaomi Mi 10 Ultra device and you need to flash in the official Xiaomi Mi 10 Ultra Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Xiaomi Mi 10 Ultra lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Xiaomi Mi 10 Ultra.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Xiaomi Mi 10 Ultra Stock Firmware Rom.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- File Size –
- Android Version –
- Country – Chinese
- Filename – cas_images_V220.127.116.11.QJJCNXM_20200813.0000.00_10.0_cn
- Download ROM
How To Flash Xiaomi Mi 10 Ultra Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 8