Xiaomi Mi Note 10 Run on Android 10 and it is powered by QCOM SD 730G Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.
Xiaomi Mi Note 10 smartphone was launched on 6th November 2019. The phone comes with a 6.47-inch touchscreen display with a resolution of 1080×2340 pixels. Xiaomi Mi Note 10 is powered by a 2.2GHz octa-core Qualcomm Snapdragon 730G processor. It comes with 6GB of RAM. The Xiaomi Mi Note 10 runs Android 9 and is powered by a 5260mAh non-removable battery. The Xiaomi Mi Note 10 supports proprietary fast charging.
The Xiaomi Mi Note 10 on the rear packs a 108-megapixel primary camera with an f/1.69 aperture; a second 20-megapixel camera; a third 12-megapixel camera and a fourth 5-megapixel camera. The rear camera setup has autofocus. It sports a 32-megapixel camera on the front for selfies.
The Xiaomi Mi Note 10 runs MIUI 11 based on Android 9 and packs 128GB of inbuilt storage. The Xiaomi Mi Note 10 is a dual-SIM smartphone that accepts Nano-SIM and Nano-SIM cards. It was launched in Glacier White, Aurora Green, and Midnight Black colors.
Connectivity options on the Xiaomi Mi Note 10 include Wi-Fi 802.11 a/b/g/n, GPS, Bluetooth v5.00, NFC, Infrared, USB Type-C, FM radio, 3G, and 4G with active 4G on both SIM cards. Sensors on the phone include accelerometer, ambient light sensor, compass/ magnetometer, gyroscope, proximity sensor, and fingerprint sensor. The Xiaomi Mi Note 10 supports face unlock.
If you own the Xiaomi Mi Note 10 device and you need to flash in the official Xiaomi Mi Note 10 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.
In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Xiaomi Mi Note 10 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Xiaomi Mi Note 10.
Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.
Check OTA Update
Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.
Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.
Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.
Requirements To Install Xiaomi Mi Note 10 Stock Firmware ROM.
- A working detectable USB Cord.
- The firmware you want to flash.
- A Windows PC.
- A Good Battery Backup
- SoC: QCOM SD 730G
- File Size – 3 GB
- Android Version – 10
- Country – Global
- Filename – tucana_images_V220.127.116.11.QFDMIXM
- Download ROM V18.104.22.168.QFDMIXM Global Stable
- Download ROM V22.214.171.124.QFDCNXM China Stable
- Download ROM V126.96.36.199.QFDRUXM Russia Stable
- Download ROM V188.8.131.52.PFDEUXM EEA Stable ROM
How To Flash Xiaomi Mi Note 10 Stock Firmware ROM Using Flash Tools.
There are various ways to flash stock ROM on a phone, for this phone use method 8