Download Xiaomi Redmi Note 8 (Ginkgo) Stock Firmware ROM (Flash File)

0

Download Xiaomi Redmi Note 8 (Ginkgo) Stock Firmware ROM (Flash File)

Xiaomi Redmi Note 8 Run on Android 9 and it is powered by QCOM SD 665 Processor. it is a Dual SIM (GSM) Smartphone that Supports Nano-SIM Card. Connectivity options include Wi-Fi, GPS, Bluetooth, USB OTG, FM & 3G.

Xiaomi Redmi Note 8 is powered by the Qualcomm SDM665 Snapdragon 665 Octa-core (4×2.0 GHz Kryo 260 Gold + 4×1.8 GHz Kryo 260 Silver) processor. The smartphone comes with a 6.3 inches IPS LCD and 1080 x 2340 pixels resolution.

The rear camera consists of a 48 MP (wide) + 8 MP (ultrawide) + 2 MP (dedicated macro camera) + 2 MP depth sensor lenses.

The front camera has a 13 MP sensor. The phone’s sensors include Fingerprint (rear-mounted), accelerometer, gyro, proximity, and compass.

The smartphone is fueled by a Non-removable Li-Po 4000 mAh battery + Fast battery charging 18W.

The phone runs on Android 9.0 (Pie) + MIUI 10.

The Xiaomi Redmi Note 8 comes in different colors like Crystal Green and Crystal Blue. It features 2.0, Type-C 1.0 reversible connector, USB On-The-Go.

If you own the Xiaomi Redmi Note 8 device and you need to flash in the official Xiaomi Redmi Note 8 Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

In Some cases When We have bricked our device, then we can bring back the phone (Unbrick) using the stock firmware. Also if You feel Your Xiaomi Redmi Note 8 lag or has an issue, then flash the Stock Firmware From the list below and save from the situation. Stock Firmware doesn’t void a warranty on your Xiaomi Redmi Note 8.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings.

Settings > About phone > Software updates > Check for Updates
If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Make sure to connect your device to a Wi-Fi network and fully charge the battery level. If your device gets the latest software update notification, you can simply grab the OTA by downloading and installing it. But if in case, you want to install any particular update version or want to keep updated with each and every firmware update, you should follow the tracker list below.

Requirements To Install Xiaomi Redmi Note 8 Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • SoC: QCOM SD 665
  • File Size – 3 GB
  • Android Version – 9
  • Country – Global
  • Filename – Ginkgo_Global_images_V11.0.9.0.PCOMIXM
  • Download ROM V11.0.9.0.PCOMIXM Global Stable
  • Download ROM V11.0.5.0.PCOINXM India Stable
  • Download ROM V11.0.5.0.PCOIDXM Indonesia Stable

How To Flash Xiaomi Redmi Note 8 Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 8

Follow the link below for the instructions on how to flash stock ROM