Flash Stock ROM with Marvell SwUpgrade P Tool

0

Flash Stock ROM with Marvell SwUpgrade P Tool

If you own a smart android device and you need to flash in the official ROM(firmware). With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

Before you start to flash the stock ROM, please make sure you make a backup of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Why you need the Marvell SwUpgrade P Tool.

  • Downgrade or Upgrade your phone
  • Unbrick any smartphone.
  • Unroot any phone.
  • Fix Issues on your smartphone.

Requirements to flash your smartphone with Marvell SwUpgrade P Tool.

How to Flash your smartphone firmware using Marvell SwUpgrade P Tool.

Install .blf Firmware (ROM) using Marvell SwUpgrade P Tool

  • Download and install the Marvell USB Driver on your Computer (if in case Marvell Drivers are already installed, then SKIP this Step).
  • Download Stock Firmware (.blf based) of your Marvell Device (if in case you have already downloaded the Stock Firmware.
  • Extract Marvell SwUpgrade Tool on the computer (assuming you have already downloaded it; if not then Download Marvell SwUpgrade Tool). Once you have extracted the tool, you will be able to see the following files:
  • Open Marvell_SwUpgrade_P.exe to Launch the tool:
  • Once Marvell SwUpgrade is launched, you will be able to see the following screen:
  • Click on BLF Button:
  • Enter the password SHHIPAD and Click on the Confirm button:
  • Locate the .blf firmware on the computer (assuming you have already downloaded the firmware of your device on the computer) and click on Open Button:
  • Connect your Marvell Mobile device to the computer (make sure the device is Power Off):
  • Click on the Play Button to Begin the installation or Flashing process.
  • Now, the installation process will begin and may take a couple of minutes to complete.
  • Once the installation process is completed, you will be able to see the Success message on the Tool.
  • Close Marvell SwUpgrade P Tool and Disconnect your Marvell Device from the Computer.

Congratulations! Now, Restart your Mobile device, and you are ready to use it.

If the Smartphone Flash Tool didn’t detect your smartphone, you might need to press the volume down or up button but do not power your phone. If you don’t install all the necessary drivers, you may experience issues detecting your phone with the PC.

There are many problems you might experience while trying to flash your smartphone with Lenovo Downloader Tool, you can google them and will definitely find a solution.

Leave a Reply