Vivo Y83 Pro Stock Firmware ROM (Flash File)

0

Vivo Y83 Pro Stock Firmware ROM (Flash File)

Vivo Y83 Pro The phone comes with a 6.22-inch touchscreen display with a resolution of 720×1520 pixels at a pixel density of 270 pixels per inch (PPI) and an aspect ratio of 19:9. Vivo Y83 Pro is powered by a 2GHz octa-core MediaTek Helio P22 (MT6762) processor. It comes with 4GB of RAM. The Vivo Y83 Pro runs Android 8.1 Oreo and is powered by a 3260mAh battery.

As far as the cameras are concerned, the Vivo Y83 Pro on the rear packs a 13-megapixel primary camera with an f/2.2 aperture and a second 2-megapixel camera with an f/2.4 aperture. The rear camera setup has phase detection autofocus. It sports an 8-megapixel camera on the front for selfies, with an f/2.2 aperture.

The Vivo Y83 Pro runs Funtouch OS 4.0 based on Android 8.1 Oreo and packs 64GB of inbuilt storage that can be expanded via microSD card. The Vivo Y83 Pro measures 155.20 x 75.20 x 7.70mm (height x width x thickness) and weighs 152.00 grams. It was launched in Black and Gold colors.

Connectivity options on the Vivo Y83 Pro include Wi-Fi, GPS, and Micro-USB. Sensors on the phone include an ambient light sensor, compass/ magnetometer, proximity sensor, and fingerprint sensor.

If you own the Vivo Y83 Pro device and you need to flash in the official Vivo Y83 Pro Stock Firmware ROM. With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users.

For More Offical Firmware For Other Devices

Before you start to flash the Stock Firmware ROM, please make sure you make a back up of the previous ROM. A charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

Check OTA Update

Many manufacturers always release firmware OTA updates to its eligible devices in batches based on the server or region. So, it’s quite obvious that most of the users may receive the firmware update notification lately. However, it’s recommended to check for OTA updates manually on your device via the phone settings. Settings > About phone > Software updates > Check for Updates. If the new software update is available, then tap Download now. Once The Update is Posted For download, tap on Install update to begin the installation.

Requirements To Install Vivo Y83 Pro Stock Firmware ROM.

  • A working detectable USB Cord.
  • The firmware you want to flash.
  • A Windows PC.
  • A Good Battery Backup
  • File Size – 1 GB
  • Android Version – 8.1
  • Country – Global
  • Filename – PD1803F Vivo Y83 Pro_MT6762_factory_8.1
  • Download ROM

How To Flash Vivo Y83 Pro Stock Firmware ROM Using Flash Tools.

There are various ways to flash stock ROM on a phone, for this phone use method 7

Follow the link below for the instructions on how to flash stock ROM